THE BUYER'S GUIDE / SELECTION
Choosing CZY-Y07 New Upgrade Electric Patient Lift Transfer Chair With Commode: Application Fit and Specification Checks
The CZY-Y07 New Upgrade Electric Patient Lift Transfer Chair With Commode is an electrically controlled mobility aid designed to assist caregivers in transferring bedridden or low-mobility patients safely. This guide walks procurement teams, distributors, and care facility managers through the key selection criteria—covering lift control type, seat configuration, space requirements, weight capacity, commode integration, and caregiver workload reduction—so buyers can confirm whether the CZY-Y07 suits their specific care environment before purchase. Comparable models from Shijiazhuang Chuangen Technology Co.,Ltd. are referenced where differences in lift mechanism, seat material, or load ratings matter to the buying decision.

Lift mechanism type (electric vs. hydraulic vs. manual): the CZY-Y07 uses an electric motor with remote control, offering hands-free height adjustment suitable for settings with a reliable power supply. Hydraulic and manual models are preferable where power access is limited or lower shipping weight is required.
Seat material and hygiene needs: the CZY-Y07 features a waterproof ABS seat with a replaceable cushion and commode, suited to frequent disinfection in clinical or care-facility environments. PU-seat models (CZY-Y02, CZY-Y03) prioritise patient comfort for home use; the CZY-Y08 offers a shower-compatible waterproof backrest for bathing-transfer applications.
Corridor and doorway clearance: the CZY-Y07's body footprint is 55 × 72 cm with a minimum pass width of 60 cm and a threshold height of 12 cm. Buyers must verify that the full transfer route (corridors, elevators, doorways) accommodates a 72 cm body width; narrower-profile hydraulic models (55 × 63 cm) are available if clearance is insufficient.
Patient weight capacity: the CZY-Y07 supports up to 120 kg, consistent with most models in the range. The CZY-Y08 is rated to 100 kg only and should be excluded for patients approaching that limit.
Commode integration and outdoor toileting: the CZY-Y07 includes a 20 × 24 cm integrated commode pan with interchangeable cushion, supporting in-transit toileting without additional equipment. Buyers needing a larger potty opening or accessory mounting (infusion pole, dining table) should evaluate the CZY-Y08.
Understanding What the CZY-Y07 New Upgrade Electric Patient Lift Transfer Chair With Commode Offers
The CZY-Y07 New Upgrade Electric Patient Lift Transfer Chair With Commode is a purpose-built patient transfer aid manufactured by Shijiazhuang Chuangen Technology Co.,Ltd. Its defining feature is an electric control height-adjustment system paired with a dedicated auxiliary lifting bracket and leg straps, allowing caregivers to reposition patients between beds, wheelchairs, sofas, or vehicles without manual lifting. The integrated commode pan adds toileting capability during extended outdoor trips or in-room care, removing the need for a separate toilet aid.
Before committing to this model, procurement teams should verify five key areas: lift mechanism type, seat material and hygiene needs, available corridor and doorway clearance, patient weight, and whether continuous electric operation is feasible in the target setting. Each criterion is addressed below.
Key Selection Criteria
1. Lift Mechanism: Electric vs. Hydraulic vs. Manual
Shijiazhuang Chuangen Technology Co.,Ltd. produces patient lift transfer chairs across three actuation types:
| Model | Lift Type | Seat Height Range | Gross Weight (packed) |
|---|---|---|---|
| CZY-Y07 | Electric motor | 45–65 cm | 46 kg |
| CZY-Y05 | Hydraulic | 44–62 cm | 46 kg |
| CZY-Y04 | Hydraulic | 42–62 cm | 39 kg |
| CZY-Y03 | Hydraulic | 42–66 cm | 39 kg |
| CZY-Y02 | Manual adjustment | 42–66 cm | 32 kg |
| CZY-Y08 | Hydraulic | 45–65 cm | 33 kg |
The CZY-Y07's electric motor delivers powered height adjustment at the touch of a remote control, which is the strongest caregiver-strain-reduction option among the range. Hydraulic models such as the CZY-Y03, CZY-Y04, and CZY-Y05 offer smooth controlled raises without a power source but require manual pump effort. The CZY-Y02 uses a manual screw mechanism and carries the lightest packed weight at 32 kg.
Select the CZY-Y07 when: the care environment has a reliable power supply, caregivers need hands-free height control, or the patient requires frequent positional changes throughout the day.
Consider a hydraulic model when: power access is limited (e.g., rural home settings, transport vehicles) or when portability and lower shipped weight outweigh the convenience of electric operation.
2. Seat Material and Hygiene Requirements
The CZY-Y07 uses a waterproof ABS seat with a replaceable cushion and a removable commode (potty size: 20 × 24 cm). ABS plastic is easy to wipe down and disinfect, making it suitable for clinical settings or any environment where fluid exposure and frequent cleaning are routine.
Buyers requiring a softer seating surface should compare the CZY-Y03 or CZY-Y02, which are fitted with PU (polyurethane) seats described as soft and comfortable—better suited to prolonged seating or home use where patient comfort is the priority over hard-surface cleanability.
The CZY-Y08 features a sponge and PU seat cushion combination plus a waterproof backrest suitable for shower use, making it the preferred option if bathing transfer is the primary use case.
Select the CZY-Y07 when: the care setting demands frequent disinfection, the patient will be transferred repeatedly throughout the day, or the facility requires waterproof hard-shell seating for infection control.
3. Doorway and Corridor Clearance
All models in the Shijiazhuang Chuangen Technology Co.,Ltd. transfer chair range share the same minimum pass width of 60 cm and a traffic (threshold) height of 12 cm. These dimensions apply to the CZY-Y07 as well.
The CZY-Y07's overall product size is 55 × 72 × 87–107 cm (L × W × H including the height-adjustment range). The 72 cm body width is wider than several hydraulic models (55 × 63 cm footprint) due to the electric mechanism housing. Buyers should measure corridor widths, elevator interiors, and room doorways against the 72 cm body width—not only the 60 cm minimum pass width—before finalising selection.
Practical check: measure the narrowest point on the intended transfer route. If any clearance falls below 72 cm, evaluate the CZY-Y03, CZY-Y04, or CZY-Y05 (all 55 × 63 cm footprint) as alternatives.
4. Patient Weight Capacity
The CZY-Y07 is rated to a maximum load of 120 kg. This is consistent with the CZY-Y02, CZY-Y03, CZY-Y04, and CZY-Y05. The CZY-Y08 carries a lower rating of 100 kg.
For patients up to 120 kg, any model in the standard range is structurally appropriate. For patients approaching or exceeding 100 kg, the CZY-Y08 should be excluded from the shortlist. Where weight is at the upper limit, confirm with Shijiazhuang Chuangen Technology Co.,Ltd. directly before procurement.
5. Commode Integration and Outdoor Toileting
The CZY-Y07 includes an integrated commode pan (20 × 24 cm potty size) designed for use during outdoor trips or extended transfers. The cushion and commode are interchangeable, allowing the seat to be reconfigured for comfort seating or toileting as needed. The 180° open-close backrest enables lateral patient entry and exit without requiring the patient to stand.
Other models also offer commode integration: the CZY-Y08 includes a potty (27 × 24 cm) and is additionally capable of accommodating an infusion pole and dining table attachment. If multi-accessory support is a priority, the CZY-Y08's accessory ecosystem may be relevant—though its lower weight limit (100 kg) must be confirmed against the patient's weight.
6. Electric Operation: Battery and Remote Control
The CZY-Y07 is equipped with an extended battery life and operated via a handheld remote control for height positioning and navigation in confined spaces. This is the sole electrically powered model in the range. Buyers operating in settings without ready access to charging points should factor in battery management as part of their procurement decision.
Frame and Structural Specifications at a Glance
All six models share a steel frame construction. The CZY-Y07 uses 40 mm / 50 mm diameter tubing with 2 mm / 3 mm wall thickness, identical to the CZY-Y05 and CZY-Y08. The CZY-Y02, CZY-Y03, and CZY-Y04 use narrower 32 mm / 38 mm tubing. The heavier tubing diameter in the CZY-Y07 contributes to its 46 kg gross packed weight (shared with the CZY-Y05), which is the heaviest in the confirmed range.
For facilities or distributors where shipping weight affects freight cost, lighter models such as the CZY-Y08 (33 kg packed) or CZY-Y02 (32 kg packed) may be more economical. The CZY-Y07's weight reflects its electric motor assembly and heavier-gauge tubing—a trade-off for structural rigidity under repeated powered actuation.
When the CZY-Y07 Is the Right Choice
The CZY-Y07 New Upgrade Electric Patient Lift Transfer Chair With Commode is best suited to buyers who can confirm all of the following:
- A reliable electricity supply is available at the point of care (home with power, hospital ward, long-term care facility).
- Corridor and doorway widths are at least 72 cm along the full transfer route.
- The patient's weight does not exceed 120 kg.
- Caregivers need powered, remote-controlled height adjustment to reduce physical strain during frequent daily transfers.
- Integrated commode functionality is required, with a preference for a waterproof, easy-clean ABS seat.
If any of these conditions cannot be confirmed, the table in Section 1 and the criteria above indicate which alternative model in the Shijiazhuang Chuangen Technology Co.,Ltd. range to evaluate next.
Summary Comparison: CZY-Y07 vs. Comparable Models
| Criterion | CZY-Y07 | CZY-Y05 | CZY-Y03 | CZY-Y04 | CZY-Y02 | CZY-Y08 |
|---|---|---|---|---|---|---|
| Lift type | Electric | Hydraulic | Hydraulic | Hydraulic | Manual | Hydraulic |
| Seat material | ABS (waterproof) | ABS (waterproof) | PU (soft) | ABS (waterproof) | PU (soft) | Sponge + PU |
| Max load | 120 kg | 120 kg | 120 kg | 120 kg | 120 kg | 100 kg |
| Seat height range | 45–65 cm | 44–62 cm | 42–66 cm | 42–62 cm | 42–66 cm | 45–65 cm |
| Body footprint | 55 × 72 cm | 55 × 63 cm | 55 × 63 cm | 55 × 63 cm | 55 × 63 cm | 55 × 66 cm |
| Packed weight | 46 kg | 46 kg | 39 kg | 39 kg | 32 kg | 33 kg |
| Commode included | Yes (20×24 cm) | Yes (20×24 cm) | Yes (21×21 cm) | Yes (20×24 cm) | Yes (21×21 cm) | Yes (27×24 cm) |
| Power required | Yes (electric) | No | No | No | No | No |
All specifications are sourced from Shijiazhuang Chuangen Technology Co.,Ltd. product records. Confirm current specifications, certifications, and availability with the manufacturer before purchase.
About Shijiazhuang Chuangen Technology Co.,Ltd.
Shijiazhuang Chuangen Technology Co.,Ltd. was established in 2019 and is engaged in the research, development, production, and sale of healthcare mobility products including electric wheelchair series, walker series, toilet chair series, and related aids for the elderly and people with disabilities. The company operates modern production lines with welding and cutting equipment and maintains a quality inspection system. Buyers and distributors seeking procurement terms, certifications documentation, or customisation options should contact Shijiazhuang Chuangen Technology Co.,Ltd. directly.
THE PEOPLE
About the author
David Miller
Read full biography
David’s expertise lies in robotic welding and ensuring the structural integrity of our products, crucial for meeting ISO13485 standards. He holds a Bachelor's degree in Mechanical Engineering and is passionate about continuous improvement in manufacturing. He frequently contributes to industry blogs focusing on advanced welding applications in healthcare devices.THE COMPANY
Shijiazhuang Chuangen Technology Co.,Ltd.
Shijiazhuang Chuangen Technology Co., Ltd. was established in 2019, after years of development, We have numbers of mature and professional modern intelligent industry lines, As well as high-tech equipment for welding and cutting production, a complete inspection and quality inspection system, and professional technical research personnel.At present, the company has passed ISO13485:2016 quality system certification, and some products have CE certification.etc.…
About Us ↗Visit company website ↗YOUR NEXT STEP
Bring your brief. Start a useful conversation.
Use case, specification, quantity and delivery window: make the next conversation specific.